 |
Grainger 5Z625
AB-402-79541
|
| |
Water Cooled Aftercooler |
| |
Thermal Transfer Water Cooled Heat Exchangers |
|
| |
 |
|
Discription: |
|
Water Cooled Aftercooler, Maximum Compressor Power 10 HP, Maximum Flow @ 100 PSI 40 CFM, Cooling Surface 3.5 Square Feet, Water NPT Inlet/Outlet 1/2 Inch, Air NPT Inlet/Outlet 1 Inch, Length 23 1/4 Inches, Height 3 1/2 Inches, Width 3 1/8 Inches |
|
|
| |
|
| |
|
| |
Additional Information: |
| |
- Water-Cooled Aftercoolers Remove damaging water, oil, and contaminants from compressed air systems. For best performance, install aftercoolers so water flows in opposite direction to compressed air. Highly efficient cooler is built with corrosion-resistant copper tubes, brass shell, and internal baffles. Mounting feet at both ends. 3 GPM of cooling water needed per 100 CFM of air Cast-iron end bonnets are removable for servicing 250 psi max., 350 DegreeF max.
| |
Features: |
| |
| |
Compressed air and gas aftercoolers |
| |
water and air cooler |
| |
pipeline aftercooler |
| |
all brass hubs and shell assemblies |
| |
reduce or eliminate galvanic and other types of corrosion |
| |
copper nickel tubes available for sea water service |
|
| |
Ratings: |
| |
| |
Tubes: 250 psi
|
| |
Shell 250 psi |
| |
Operating Temperature 350° F |
|
| |
Materials: |
| |
| |
Tubes Copper
|
| |
Shell Brass |
| |
End Hubs brass |
| |
end bonnets cast iron |
| |
baffles brass |
| |
mounting brackets (optional) steel |
| |
gaskets: nitrile rubber |
| |
nameplate: aluminum foil |
|
|
|
| |
|
|
|
|
